El Castillo Electrosoldado MEXLAM es fabricado con alambres trefilados en frio corrugados y electrosoldados utilizando la mas avanzada téconolgía, con los estrictos controles de Calidad.
El Castillo Electrosoldado se fabrica con refuerzos longitudinales de Alambres Grado 6,000 Kgf/cm2 y estribos de Alambres transverzales de Grado 5,000 Kgf/cm2.
Propiedades mecánicas:
Resistencia a la tención: 5700 kgf/cm2 mínimo
Límite a la fluencia: 5000 kgf/cm2 mínimo
Resistencia al esfuerzo de cortante: 1600 kgf/cm2 mínimo
Elongación (Ductilidad): Alargamiento a la ruptura en 10 diámetros 5 % mínimo.
Normas:
El Castillo Electrosoldado se fabrica bajo las Normas de calidad.NMX-B-072-CANACERO-2019, NMX-B-253-CANACERO-2019, NMX-B-456-CANACERO-2018
Presentación
Tramos de: 6.00 m
Aplicaciones: Contratrabes, Castillos, Dinteles, Cerramientos, Trabes.
| Descripción | Calibres | Separación (cm) | (fy) | Cortante | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Designación | Pulg. | 0 mm | As (cm2) | Long. | Transv. | Kgf/cm2 | Kgf/mm2 (min.) | |||||||||
| 10 X 10 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 5 5 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 10 X 15 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 5 10 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 10 X 20 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 5 15 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 10 X 25 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 5 20 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 10 X 30 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 5 25 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 10 X 35 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 5 30 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| Descripción | Calibres | Separación (cm) | (fy) | Cortante | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Designación | Pulg. | 0 mm | As (cm2) | Long. | Transv. | Kgf/cm2 | Kgf/mm2 (min.) | |||||||||
| 12 X 12 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 7 7 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 12 X 15 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 7 10 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 12 X 20 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 7 15 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 12 X 25 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 7 20 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 12 X 30 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 7 25 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 12 X 35 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 7 30 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| Descripción | Calibres | Separación (cm) | (fy) | Cortante | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Designación | Pulg. | 0 mm | As (cm2) | Long. | Transv. | Kgf/cm2 | Kgf/mm2 (min.) | |||||||||
| 15 X 15 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 10 10 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 15 X 20 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 10 15 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 15 X 25 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 10 20 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 15 X 30 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 10 25 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 15 X 35 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 10 30 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 15 X 40 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 10 35 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| Descripción | Calibres | Separación (cm) | (fy) | Cortante | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Designación | Pulg. | 0 mm | As (cm2) | Long. | Transv. | Kgf/cm2 | Kgf/mm2 (min.) | |||||||||
| 20 X 20 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 15 15 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 20 X 25 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 15 20 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 20 X 30 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 15 25 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 20 X 35 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 15 30 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
| 20 X 40 X 4 | 1/4" | 0.250” | 6.35 | 0.3166 | 15 35 | - | 5,000 | 2,500 | ||||||||
| 8 | 0.162” | 4.11 | 0.1329 | - | 15.8 | 5,000 | 2,500 | |||||||||
APLICACIONES
Contratrabes, Castillos, Dinteles, Cerramientos, Trabes.
